Digital:
- Digital combustion management means optimal combustion figures, continually reproducible setting figures and ease of use;
- Simple operation;
- Flexible communication possibilities;
- Bus communication with external systems and building management systems;
- New technology advantages;
- No additional burner controls are necessary as control is effected by the combustion manager. Only a motor protection switch for burner motor and control fusing are required externally;
- Reduced installation expense;
- Commissioning and service work takes less time;
Compact and quiet:
- The newly developed Weishaupt burner monarch® WM 10 is compact, powerful and quiet. It continues the 50 year long success story of the legendary monarch® series;
- Futuristic fan technology;
- Fast commissioning, simple servicing;
- Control variations:
- Oil: 3 stage (T) (or 2 stage with low impact start and change-over release) modulating ®.
- Gas: sliding two stage or modulating (ZM) depending on the type of load control: Within its operating range, the burner’s output is matched to the current heat demand.
- A number of variations are available to meet the different emission and operating requirements:
- Version ZM;
- Version LN (LowNOx);
- Version ZMI;
- Version 3LN;
- Fuels: Natural gas E, Natural gas LL, Liquid petroleum gas B/P, Fuel oil EL (<6 mm2/s at 20°C) to DIN 51 603, T1;
Application range: The EN 267 and EN 676 approved Weishaupt oil, gas and dual fuel burners WM 10 are suitable for:
- Installation on heat exchangers to EN 303;
- Warm water plant;
- Steam boilers and hot water plant;
- Intermittent and continuous operation;
- Installation on air heaters;
- Permissible ambient conditions;
- Ambient temperature during operation:
-10 to + 40 °C (oil/dual fuel burners)
-15 to + 40 °C (gas burners)
- Humidity: max. 80% relative humidity, no dewpoint;
- Suitable for use indoors only;
- For plant in unheated areas certain additional measures may be required (please enquire);
Certification:
The burners are tested by an independent body and conform to the following standards and EU directives:
- EN 267 and EN 676;
- Machinery Directive 2006/42/EU;
- Electromagnetic Compatibility EMV 2004/108/EU;
- Low Voltage Directive 2006/95/EU;
- Pressure Vessel Directive 97/23/EU;
- The burners carry the CE and CE-PIN label;
The most important advantages:
- Easy fuel change over between gas and oil on dual fuel burners;
- Digital combustion management with electronic compound regulation at all ratings;
- Compact construction;
- Sound attenuated air inlet as standard for quieter operation;
- Powerful fan due to the specially developed fan geometry and air damper control;
- All WM 10 burners are delivered with the mixing head preset for the required output of the burner;
- IP 54 protection as standard;
- Easy access to all components, such as: mixing head, air damper and combustion manager;
- Reliable operation with three stage, sliding multi stage or modulating operation, depending on version and capacity regulation;
- Computer controlled function test at the factory of each individual burner;
- Burners can be supplied pre-wired with plug connections;
- Excellent price / capacity ratio;
- Well established, global service network;
Reviews
There are no reviews yet.